Homepage

The Model

Draft projects

Articles published

Technologies

Annexed material

Downloads

 About Bakens Verzet

STICHTING BAKENS VERZET

1018 AM AMSTERDAM, THE NETHERLANDS

Director,

T.E.(Terry) Manning,

Schoener 50,

1771 ED Wieringerwerf,

The Netherlands.

Tel: 0031-227-604128

Homepage: http://www.flowman.nl

E-mail: (nameatendofline)@xs4all.nl : bakensverzet

 


MODEL FOR SUSTAINABLE SELF-FINANCING INTEGRATED RURAL AND POOR URBAN DEVELOPMENT FOR THE WORLD'S POOR

Incorporating innovative social, financial, economic, local administrative and productive structures, numerous renewable energy applications, with an important role for women in poverty alleviation in rural and poor urban environments.

 


 

"Money is not the key that opens the gates of the market but the bolt that bars them"

 

Gesell, Silvio The Natural Economic Order

Revised English edition, Peter Owen, London 1958, page 228

 


 

Edition 9: 07 December,2006

 


SOLAR SPRING : MAINTENANCE

How to replace the motor brushes

Tools required : Fine pliers, small screwdriver, small electricians spanner.
Wear and tear on the motor brushes is such that after a number of years (indicatively 5-7 years) they will need to be replaced. It may also be good practice to replace the brush springs on such occasion. The need for a brush change is indicated by simple stoppage of the pump caused by the spring mechanisms which reach an end stop blocking pressure on the brushes so that current no longer passes to the motor. Unnecessary repeated opening of a pump to check brush wear can be harmful in that it introduces more air and therefore oxygen into the motor chamber thereby aggravating the possibility of corrosion of certain parts. Where pumps have been installed in the framework of a rural water supply project, they should be pulled at 5-6 year intervals and the brushes changed irrespective of their condition.

Step One

Lift the arms of the spring clips on the two black motor brush holders (344) on the bottom end of the motor and remove and examine the brushes (344).
Note : The Solar Spring brushes have an expected life span of between 3 and 5 years' continuous use, and are protected at their external end in such manner as to avoid sparking in case of total wear.
The actual length of the brushes when new is approx 15mm.
The usable length of the brushes is : 12mm
Each millimetre of usable length represents indicatively a life of 400 hours actual use, usually more.
If the remaining brush length is 6mm or less, the brushes should be replaced.
If the brushes are not replaced, it is wise to register remaining brush length for future use.

Step two

Check fast-on terminals and spades (359), earth nut (360) and earth spade (360). They need to be removed only when the motor itself (343) or the motor shroud (358) or the electric cable (363) has/have to be replaced.

 


Menu for the maintenance of Solar Spring pumps.


Main menu Solar Spring pumps.


Some recommended technologies,


List of attachments to the Model.


Complete index of the Model.


Model Homepage.


Typical list of graphs and drawings.
List of abbreviations used.
List of key words.
Documents for funding applications.


Homepage Bakens Verzet