| Axis rods | Reassembly 21,22; removal 20 |
| Bleeder nipple | Cleaning03,Cleaning13 |
| Booster | Operation pages 26-27;Maintenance Pages 28 through 38 |
| Brushes motor | Access04;maintenance 05 |
| Cam connector | Dismantling06,07 |
| Cam shaft | Changing, removal, replacement 06,07 |
| Controllers | Operation pages 26-27 Maintenance pages 28 through 38 |
| Body "O" ring | Reassembly 08; seating 09; warning 08 |
| Drawing of pump | Drawing 25 |
| Electric cable | Check11; weld joint 11; connections motor 12; warning 9, warning14 |
| Filter | Reassembly 09 ; removal 04 |
| Foot valve rubber | Access 14;replacement 14 |
| Hyboost | Fitting14, removal 14 |
| Motor | Magnets, fitting 39 |
| Motor base ring | Reassembly 08 |
| Nipple (bleeder) | Cleaning 13 |
| Oil | Notes on 24, opening pump 18; warning 04,warning06,07, warning 09,warning 18,19 |
| Oil seal | Acess 23, replacement 23 |
| Opening pump | Opening pump 03 |
| Ovoid | Access 13, check 13 |
| Ovoid chamber | On opening 03,04; re-fitting 13 |
| Piston bearings | Access 19, replacement 20; reassembly 20,21,22 |
| Piston gaskets | Check 19 |
| Piston guides | Check 19 |
| Piston "O" rings | Check 19 |
| Pistons | Access 18, check19, reassembly 20,21,22 |
| Pump assembly | Drawing 18; opening 18; reassembly 19b |
| Pump body | Check 23 |
| Pump body rings | Check 23 |
| Rapid couplings | Removal 13; reassembly 08,09 |
| Safety cord | Check 10 |
| Seal | Opening seal 03, re-sealing 10 |
| Seal ring for body | Reassembly 07 ; removal 04 |
| Shaft bearing | Access 23; substitution 23 |
| Springs | ChangeChange 19, Check 19 |
| Stator | Magnets 39 |
| Terminals pump | Check 05 |
| Tie-rod U strap | Release 03; reassembly 09,10 |
| Valve chamber | Removal;Drawing 04 |
| Valve rubbers | Access 15; reassembly 16; replacement;Drawing 16 |
| Valve spindle nut | Removal 16; reassembly;Drawing 17 |
| Washers tie-rod | Reassembly 10 |
| Wiggle wire | Bleeder cleaning 03,cleaning 13 |
